BRC Brickforce is a ladder-type, galvanized steel
masonry reinforcement for placement in concrete block
walls. BRC Brickforce is comprised of two main line
wires joined by cross wires welded at 200mm and is
supplied in straight strips 3.2mm long (10'-6") and
in widths to accommodate standard concrete block sizes
of 4", 6", 8" and 12".
High Yield and Plain Round Reinforcing Steel Bars
customized to your specific needs or bent to British and
American Standard Shape Codes to produce reinforcing
elements like Stirrups, Starter Bars, Strip Footings,
Links, Extensions and more. The use of preformed
(Scheduled) reinforcement components provides
significant cost savings and increases efficiency on
construction projects.
Hot rolled Reinforcing Steel Bars provide the primary
strength in the reinforcement of concrete structures.
They are encased in concrete both vertically and
horizontally to provide supporting power to columns
and crossbeams. Rebars are available in sizes ranging
from 6mm to 32mm, in High Yield and Mild Round bars.
BRC Welded Wiremesh is a pre-fabricated steel mesh
for the reinforcement of concrete slabs. Square and
rectangular meshes are manufactured in flat sheets
from cold reduced high yield-strength steel wire.
Meshes are available in a variety of standard sizes or
custom fabricated to you special design requirements.
(Refer to the products list or Technical Manual
section for information on standard sizes). Electronic
welding on automated machines ensure uniform wire
spacing and consistent cross-sectional areas.
