|
<<
Product Showcase
|
|
|
Galvanized
Nails
Galvanized coated twisted nails with conical shaped
washers for use with the 8/3 Corrugated cladding
profile. Available in 2-1/2" size. Suggested
spacing every 9" along wood purlins.
|
|
|
|
|
|
Wood Grip Screws
Self-Drilling hex-head fasteners for use with U-Panel
and R-Panel cladding profiles to secure cladding to a
wood structure. Available in 1-1/2" and 1"
sizes. Available in Permaclad, Colourclad &
Stainless Steel finishes. Suggested spacing every 1ft
along wood purlins and fascias.
|
|
|
|
|
|
Stitching Screws
Self-Drilling hex-head fasteners for use with
U-Panel and R-Panel cladding profiles to secure metal
to metal cladding interfaces. Available in 3/4"
size. Available in Permaclad, Colourclad &
Stainless Steel finishes. Suggested spacing every
24" along side laps and every 18" on either
side of ridgecaps and along trim flashings
|
|
|
|
|
|
Tape SealMastic rolls with strippable
protective paper used for sealing laps and various
interfaces on cladding. Available as 50ft rolls. Used
with all types of roofing systems.
|
|
|
|
|
|
Profiled Foam Closures
Strips of profiled foam used to block the spaces
caused primarily where the cladding profile meets a
flat surface. Available to fit 8/3, U-Panel and
R-Panel corrugations. Available in Permaclad,
Colourclad & Stainless Steel finishes. For 8/3,
U-Panel and R-Panel: Foam Fillers/Square Sponge is
used on hip diagonals. For U-Panel and R-Panel: Inside
Filler Blocks are used at the eaves and Outside Filler
Blocks are used under the ridgecaps. 8/3 Filler Blocks
are used at both eaves and ridges.
|
|
|
|
|
|
Next page
|
